Products: Nikwax TX.Direct Spray 300ml

Nikwax TX.Direct Spray 300ml

Product Code: 571
0 Reviews
0.0/5

$22.95

In stock

For waterproofing rain and snow clothing

Recommendations

The high performance waterproofer designed to enhance performance and revitalize the breathability of waterproof clothing with wicking liners. Easy to apply by hand, non flammable, PFC and aerosol free.

 

For waterproofing rain and snow clothing

Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct.

Waterproof clothing needs to be breathable…

When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry. The waterproof fabric must allow moisture vapor to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet. Nikwax TX.Direct

 

Use Nikwax TX.Direct when your raingear soaks up water…

Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct, after cleaning first with Nikwax Tech Wash.

 

If your raingear doesn’t have a wicking lining, use Nikwax TX.Direct Wash-In…

Using the right waterproofing product is important. Nikwax TX.Direct Spray-On is fantastic for raingear with wicking linings, as it provides Durable Water Repellency (DWR) without impairing wicking properties. However, if wicking linings aren’t present, using Nikwax TX.Direct Wash-In ensures you won’t miss any areas (complete DWR coverage!) and it’s easy to apply in a washing machine.

 

 

Environment

  • 100% Recycled Plastic Bottle
  • Water based
  • PFC free
  • Non-Aerosol

Features

  • Easy to use spray-on waterproofing for all breathable waterproof clothing with wicking liners
  • Adds water repellency to the areas that need it most and revives breathability without tumble drying
  • Enhances the performance of your gear, keeping you warmer and drier
  • Recommended for Gore-Tex, Sympatex, eVent, and all other waterproof fabrics

 

Apply Nikwax TX.Direct Spray-On by hand…
For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash. No need to dry item(s) before waterproofing. Shake well before use. Follow garment care label instructions.

  1. Protect working surface and lay clean wet fastened garment flat.
  2. Hold bottle 6 inches (15cm) away from garment.
  3. Apply evenly to outside of fabric.
  4. Wait for 2 minutes. Remove any surplus product with a damp cloth.
  5. Check carefully to ensure no areas have been missed.

 

Volume Guide: These volumes are approximate and depend on the condition of the fabric being treated. Jacket 8fl oz (250ml); rain/ski pants 5fl oz (150ml), onesie 13fl oz (400ml).

 

Nikwax TX.Direct treated clothing needs no heat to develop Durable Water Repellency (DWR)…
Air dry (after several minutes check for and remove surplus product with a damp cloth) or tumble dry on a low setting if care label allows.

 

The high performance waterproofer designed to enhance performance and revitalize the breathability of waterproof clothing with wicking liners. Easy to apply by hand, non flammable, PFC and aerosol free.

 

For waterproofing rain and snow clothing

Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct.

Waterproof clothing needs to be breathable…

When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry. The waterproof fabric must allow moisture vapor to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet. Nikwax TX.Direct

 

Use Nikwax TX.Direct when your raingear soaks up water…

Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct, after cleaning first with Nikwax Tech Wash.

 

If your raingear doesn’t have a wicking lining, use Nikwax TX.Direct Wash-In…

Using the right waterproofing product is important. Nikwax TX.Direct Spray-On is fantastic for raingear with wicking linings, as it provides Durable Water Repellency (DWR) without impairing wicking properties. However, if wicking linings aren’t present, using Nikwax TX.Direct Wash-In ensures you won’t miss any areas (complete DWR coverage!) and it’s easy to apply in a washing machine.

 

 

The high performance waterproofer designed to enhance performance and revitalize the breathability of waterproof clothing with wicking liners. Easy to apply by hand, non flammable, PFC and aerosol free.

 

For waterproofing rain and snow clothing

Breathable waterproof garments are most likely to get sweaty and wet inside when used in damp or wet conditions. If the outer fabric absorbs water, the garment can lose up to 70% of its breathability. Therefore, the Durable Water Repellency (DWR) on the outer fabric of your jacket must be maintained to ensure comfort. It will eventually wear off and need to be renewed with Nikwax TX.Direct.

Waterproof clothing needs to be breathable…

When we work hard, we sweat. The evaporation of sweat cools us down and keeps us comfortable. But, when it rains we want to avoid getting wet, so we put on waterproof outerwear to keep us dry. The waterproof fabric must allow moisture vapor to pass through it, or ‘breathe’; otherwise our sweat cannot evaporate, causing us to overheat and get wet from condensation. Additionally, if the outer fabric of your garment absorbs water and ‘wets out’ its breathability will be reduced, causing you to feel clammy and wet. Nikwax TX.Direct

 

Use Nikwax TX.Direct when your raingear soaks up water…

Your raingear could be soaking up water just because it is dirty. First, try cleaning it with Nikwax Tech Wash, and if it is fairly new, or recently re-waterproofed, the Durable Water Repellency (DWR) will be revitalized just from cleaning. But, once the garment has been thoroughly worn, you will need to add DWR, using Nikwax TX.Direct, after cleaning first with Nikwax Tech Wash.

 

If your raingear doesn’t have a wicking lining, use Nikwax TX.Direct Wash-In…

Using the right waterproofing product is important. Nikwax TX.Direct Spray-On is fantastic for raingear with wicking linings, as it provides Durable Water Repellency (DWR) without impairing wicking properties. However, if wicking linings aren’t present, using Nikwax TX.Direct Wash-In ensures you won’t miss any areas (complete DWR coverage!) and it’s easy to apply in a washing machine.

 

 

  • Easy to use spray-on waterproofing for all breathable waterproof clothing with wicking liners
  • Adds water repellency to the areas that need it most and revives breathability without tumble drying
  • Enhances the performance of your gear, keeping you warmer and drier
  • Recommended for Gore-Tex, Sympatex, eVent, and all other waterproof fabrics

 

Apply Nikwax TX.Direct Spray-On by hand…
For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash. No need to dry item(s) before waterproofing. Shake well before use. Follow garment care label instructions.

  1. Protect working surface and lay clean wet fastened garment flat.
  2. Hold bottle 6 inches (15cm) away from garment.
  3. Apply evenly to outside of fabric.
  4. Wait for 2 minutes. Remove any surplus product with a damp cloth.
  5. Check carefully to ensure no areas have been missed.

 

Volume Guide: These volumes are approximate and depend on the condition of the fabric being treated. Jacket 8fl oz (250ml); rain/ski pants 5fl oz (150ml), onesie 13fl oz (400ml).

 

Nikwax TX.Direct treated clothing needs no heat to develop Durable Water Repellency (DWR)…
Air dry (after several minutes check for and remove surplus product with a damp cloth) or tumble dry on a low setting if care label allows.

 

  • 100% Recycled Plastic Bottle
  • Water based
  • PFC free
  • Non-Aerosol
Rating Filter
Rating Filter
{{ reviewsTotal }}{{ options.labels.singularReviewCountLabel }}
{{ reviewsTotal }}{{ options.labels.pluralReviewCountLabel }}
{{ options.labels.newReviewButton }}
{{ userData.canReview.message }}

For waterproofing rain and snow clothing